HardieBacker is a leading cement board brand with high-quality products that you can buy online from Topps Tiles at great prices. HardieBacker board can be used for walls, floors and countertops and is designed to be as easy to install as possible.
What is Hardie backer board used for?
Hardie backer boards are a great assistant to any tiling job and provide a strong base for any project you are undertaking. The purpose of a cement backer is to create a surface for you to tile onto. The surface is straight and flush; taking away the worry of an uneven wall or floor.
Which is better cement board or Hardibacker?
Durock is a reliable cement product that contains glass mesh. It is the heavier of the two materials, which means it is more difficult to use and maneuver. HardieBacker is much more light, and it is also the best selling brand of cement board available. It is much cleaner because it does not have any glass in it.
Is Hardie board and cement board the same?
Hardie Board is the best known brand of cement board siding, which is often called fiber cement. The James Hardie product is so familiar in the building industry that people often forget that it is a brand. Home owners prefer cement board siding because it so closely resembles other building materials.
What is the difference between backer board and cement board?
Cement backer board is also called cement board, and it’s the most commonly used backer board for all manner of ceramic and porcelain tiles. Made of cement and reinforced on the top and bottom with fiberglass, this waterproof backer board is generally used for tiled shower surrounds and floors in wet areas.
Can I tile directly on Hardibacker?
HardieBacker can take up to 200kg of tile hanging weight per m2 so almost any tile can be fixed. Once secured cover the joints with Alkaline-resistant tape and feather the tile adhesive to leave a 150mm wide joint.
Do I need vapor barrier behind Hardibacker?
Hardibacker doesn’t need a vapor barrier or waterproofing except you do need to tape and thinset the joints.
Does Hardibacker need to be waterproofed?
Hardiebacker (James Hardie): the use of a waterproof membrane, vapor barrier or vapor. retarding membrane is optional unless the local building code requires it.
What is the best backer board to use in a shower?
Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.
Do I need to seal cement board before tiling?
Contrary to popular thought, tile and grout are not waterproof, and some moisture will penetrate even if sealant is used. However, if you choose to use concrete backerboard, which is much stronger and more durable than gypsum board, a water vapor membrane must be placed underneath it or a sealant applied on top of it.
Can you use cement board in a shower?
Cement boards can be used in a shower because they can be exposed to water and moisture without warping, rotting, and deteriorating. Although cement boards can generally be used in any wet areas such as showers and bathrooms, there are other things that you should be considered as well which will be discussed below.
Which side of Hardibacker goes out?
Which side goes up, smooth or rough? Either is acceptable, but we recommend that the smooth side with the nailing pattern of every 8″ on center go up. What subfloor should HardieBacker® cement board be installed over?.
Can you use Hardibacker for shower walls?
3 Answers. 1/4″ hardibacker alone is an unsuitable substrate for shower wall tile. If it were attached to properly waterproofed drywall, plywood, or plaster it would be fine. Think about it, one wayward elbow, knee, or hip bump and you may get flexion which would cause the grout (or tile) to crack.
What kind of board do you use in a shower?
In showers, the standard substrate is tile backer, also called cement board or cement backer board.
Do I need backer board for kitchen backsplash?
Waterproof tile backing board is only necessary for walls and floors that will be directly exposed to running water, such as in a shower. A backer board is not required for all wall tile. For instance, a tile backsplash in your kitchen can be installed over standard drywall.2 days ago.
How thick should cement board be for shower walls?
Walls: Use 1/2-inch or 5/8-inch-thick cement board, not 1/4-inch. The extra thickness is needed when spanning the studs and it provides a solid base for the tile.
Do you have to tape seams on Hardibacker?
For tile backer boards such as Durock, Wonderboard, Hardiebacker, Permabase, and others the seams between the board need to be treated with 2-inch alkali-resistant mesh tape. It helps to make the walls that are to be tile more monolithic.
Do I need to waterproof shower walls before tiling?
Contrary to popular belief, ceramic tile and grout, by themselves are not waterproof. Water can penetrate through cement-based grout and work its way through the substrate. To prevent water damage, you must install a waterproof membrane just below the tile bonding mortar as close to the tile as possible.
Does a shower need a vapor barrier?
No matter how watertight you think your shower is, moisture in the form of water vapor may still get in. They are required beneath your shower pan and behind your shower walls. Moisture barriers can be made of polyethylene or a membrane that is rolled directly onto the drywall.
Does Thinset stick to RedGard?
From what I have read, the premixed thinset does not dry out to form a good adhesive bond when applied over/under a non-permeable membrane like Redguard or the Kerdi-band products. The dry mix (where you add the water on-site) does.
What thickness Hardibacker should I use?
We recommend 1/4 in HardieBacker® board for floor applications, unless 1/2 in thickness is needed for transition. On existing structures: Ensure subfloor is not damaged. Replace any loose, warped, uneven or damaged sections of floor.
Do you put thinset under Hardibacker?
The installation manual for HardieBacker suggests to embed it in thin-set and it should be installed over plywood. Thus I would suggest removing the current wood planks flooring, install a 3/4″ outdoor grade plywood, thinset and then your HardieBacker (screwed down).